Horizontal wrapping machine

We have changed the quotation of GG-E600 horizontal wrapping machine( added one sensor, conveyors’ length-1.5m, stretch film width -300mm), please see the attachment.
Im sorry to tell you, the speed of this machine is 14-20sec/pcs. Because the delay, soft start/stop, stretch film cutting and loading  need to take 10-12 seconds.
If choose this horizontal wrapping machine, you might need two sets to keep your production line running.
But there is another solution which we might mentioned when you were here, that is to change the mechanical cutter to a heat cutter, check this video link below:
The stretch film will be melt by the heat cutter instead of being cut mechanically.
If we use this cutter, there will be no delay and stop, the speed will be 7-8sec/pcs. The price of this machine will be xxxxx usd.
Thanks for the information you gave.
According to your requirement, we chose to quote you with our E600.
This machine has infeeding and outfeeding conveyors which are powered by motors. And the automatic cutter in horizontal wrapping machine will cut and load the packaging material automatically.
Furthermore, due to the small weight of your products, we have to add the special press down device for fixing the panel when the machine is working.
Our press down device has used springs and soft material in order to prevent your product from scratch and deformation.

How to packing the coils shape objects

coil packing machine

 

3. Packaging solution for one of steel wire manufacturer.

coil wrapping machine for copper  coil packing machine for steel strip  automatic hose packing machine

 

coil wrapping machine for copper  coil packing machine for steel strip  automatic hose packing machine

Great. How many meters of sample hose do you need? Also when do you need it by? Hoping to send by ocean if you don’t need it in the next 6 weeks or by air if you don’t need much.

Jonathan

On Thu, Apr 19, 2018 at 2:34 AM, info <info@fhopepack.com> wrote:

Hello Jonathan,

Good day.

Our team already had a meeting this morning and finished the detail solution dission about your coiling requirement.

The designing is processing.

Regards

Yoki

 

Date: 2018-04-16 21:37

To: info

CC: randal

Subject: Re: Hose Winding Machine

Hi Yoki,

Any update on the wire transfer?

Jonathan

On Apr 12, 2018, at 5:53 PM, info <info@fhopepack.com> wrote:

Hello Jonathan,

Not yet.

May i have the bank slip so that we can check with bank.

Regards

Yoki

————————————————————

Shanghai Fhope Machinery Co.,Ltd

 

 

Date: 2018-04-13 02:50

To: info

CC: Randal

Subject: Re: Re: Hose Winding Machine

Hi Yoki,

Did you receive payment? Also how about other questions?

Jonathan

On Wed, Apr 11, 2018 at 11:24 AM, Jonathan Sacks

Hi Yoki,

50% down was paid to the US account and you should see it tomorrow. Please confirm when received.

Also, please give me more detail on how many meters of sample hose you would like.

Also, please give me more information on how to get to factory from Pudong airport and which area I should find a hotel. I will buy my air ticket in about a month and confirm exact dates with you before I book.

Jonathan

On Tue, Apr 10, 2018 at 7:30 AM, info <info@fhopepack.com> wrote:

Hello Jonathan,

Please check the PI attached with the account of City bank account in NY.

If it is not ok for you, we can send a another account.

Accoording production schedule it can be ready at the middle of the July.

1 day is ok for training.

We need the sample hose for testing, it is better provide two or more drums for Min.&Max  hose OD.

You can send it one week later.

The installation warehouse address for delivery:   #5,No.298,Middle Shengxiang road,Qiandeng Town, Kunshan,Jiangsu

Name:     Mr.Cheng    Mobile: 13818586826

GHVN

Hannover 2017,VS proudly introduced a new approach to the shoulder groove insertion.

New super harrow features:

Additional positive rake Angle, 30 °

  • reduces cutting force
  • suitable for low-intensity nonferrous and nonferrous metals

Suitable for small parts processing

  • improving the formation of chips
  • designed to prevent crater wear and chip accumulation

In the GHVN26 and GHVN29 geometries, the new supernormal rake slot inserts can reach 4.90mm.

Insert is in the popular multi-purpose VTX level, as well as the required VKX level. – VS highly popular GROOVEX microscopy system

Internal microprocessing operation, small to 1.0mm. EMO Hanover 2017

VS is providing innovative and superior machining solutions for its customers, and is introducing new and important products for the microscope production line:

  • three new tool support design, adding fixture and versatility
  • selective microscope insertion can now be used in different boring and grooving operations

The three features of the clamping device:

  • reduce the clamping device:

O newly designed vibration reduction handle

O tools live longer

The economic solution

The o contraction tool is applicable to all microscope tubes with diameters of 4mm to 7mm in diameter

  • circular tool, no shoulder circle tool:

O Four – flat design

It can be placed on both sides of the machine tool table

The circular tool can be used for all microscope inserts, 4mm to 7mm

Insert the diameter

The double-sided circular tool has 4mm,5mm,6mm and 7mm

— in EMO Hannover 2017, VS LTD. Proudly introduced

The new SHAVIV GENiusTM hand Deburring tool selects network applications. SHAVIV blades, suits and toolkits are the choice of major companies in industry and household use. The new SHAVIV GENiusTM web application software lets users easily navigate and select the correct DB solution based on specific applications and required materials.

You can enjoy these great features on any device

SHAVIV GENiusTM provides the most complete deburring solution for all types of materials and applications.

VGH cuts

Considering the workpiece material and the groove diameter, it is recommended to start the first cut with no more than the insertion width.

VGH cuts the full range of rotary solutions

Deep grooving, thread, separation, boring, surface groove

A new generation of VGH cutting tools opens up more applications exposed to the same deep grooves in the pockets,

Separate, turn, copy, bore, face groove and thread. The insertion of VGH cutting provides excellent specified chip formation and carbide grades to make VGH cut the most versatile products.

The vgh-cut tool covers a wide range of thread processing standards, reaching a depth of 10.0 mm, during the processing between the shoulders and the main shaft. The vgh-cut has a unique multi-functional geometry that allows end users to reduce inventory in a wide range of application options.

Groovex’s Groovical series provides an improved solution for both internal and external grooves and steering applications. GHVN26 and GHVN29 have three cutting corners and a unique rigid clamping system to improve productivity.

New ghvn-style inserts offer new applications, including spiral chips for rotary and grooved chips, new separation tools, and processing of holders of near-shoulder and left hand tools.

The new series of vgh-cut tools made up of GROOVEX provides a wider range of applications and options

Insert deep grooves, separate, flanging, copying, boring, surface groove and thread. VG – the Cut

Inserts also provide a variety of chip and carbide grades, making the vgh-cut program a very generic system.

The vgh-cut tool covers a wide range of thread processing standards between the shoulders and near the main shaft, reaching a depth of 10.0 mm. The vgh-cut has a unique multi-functional geometry that allows end users to reduce inventory in a wide range of application options.

The new SHAVIV GENius web application software lets users easily browse and select the right hand deburring solution based on the application and required materials.

Over the past year, VS’s main GROOVEX GrooVical program has been developing rapidly, with precise grooves and turning applications. In emotional rock

New indexable groove insertion

  1. The work starts from the surface grooves and is close to the outside diameter (figure A). In a short interval of work (pecking), the maximum slotting depth is twice the insertion width.
  2. In this method, the center of the artifact required by the entire pocket shape (figure B) is directed toward the center of the artifact. Each additional slot width should be less than the approximately inserted width. 0.3 mm.
  3. Only the first groove of the project is completed in a short time (pecking) for better chip evacuation. Other grooves can persist based on application recommendation feeds.
  4. The recommended chip for alloy steel is GP. Use GT for stainless steel.
  5. Work from the outside diameter of the workpiece and work. Produces the desired radius, and then the face rotation operation approaches the tangent point of the inner radius.
  6. Start from inside diameter to the bottom of the workpiece and generate the required radius as needed.

New indexable groove insertion

Groovex’s Groovical series provides an improved solution for both internal and external grooves and steering applications. GHVN26 and GHV29 / GHVN29 function inserts have three cutting corners and a unique rigid clamping system to improve productivity.

New style of GHVN insertion in Groovical line provides a new application, including rotation and groove chip, the formation of helical chip, spiral chips used in grooves, insert new separation, processing close to the shoulder and left hand tools.

issue

It is applicable to high cutting speed and open slot application under dry conditions. Multi-layer AlTiN coating, commonly used to prevent peeling and peeling.

* for VHTX level, increase speed by 20%.

For better chip evacuation in gutters, short chips are preferable. Therefore, it is recommended to work (pecking) within a short time interval, and the maximum slotting depth is twice as long as the insertion width.

Low feed

Low feed rate and sufficient chip evacuation improve the stability and service life of the process.

Feed rate should be increased only if improved evacuation is needed to prevent wall scratches or chip tangles.

In order to separate, the feed rate was reduced by 30% when R/L insertion was used.

During the separation, it is recommended to reduce the feeding amount by 50% as a rotation center of the insertion mode.

Reduce the feed when the insert method is close. 6.0 mm diameter.

In order to better get the chip out to the groove of the face, creating a short chip is preferable. Therefore, it is recommended to work (pecking) within a short time interval, and the maximum slotting depth is twice as long as the insertion width.

Considering the workpiece material and the groove diameter, it is recommended to start the first cut with no more than the insertion width.

The correct chip formation is critical to the evacuation of the chip.

Low feed rate and sufficient chip evacuation improve the stability and service life of the process.

Feed rate should be increased only if improved evacuation is needed to prevent wall scratches or chip tangles.

In order to separate, the feed rate was reduced by 30% when R/L insertion was used.

During the separation, it is recommended to reduce the feeding amount by 50% as a rotation center of the insertion mode.

Reduce the feed when the insert method is close. 6.0 mm diameter.

In order to better get the chip out to the groove of the face, creating a short chip is preferable. Therefore, it is recommended to work (pecking) within a short time interval, and the maximum slotting depth is twice as long as the insertion width.

Considering the workpiece material and the groove diameter, it is recommended to start the first cut with no more than the insertion width

thread milling

  • for a tool with a diameter of 8, 10, 12 mm, provide the coolant thru
  • thread length: 2xDo and 2.5 xdo (thread diameter)
  • all tools are left-handed, right and left
  • thread standard:

ISO metrics: from M3x0.5 to M23x2.0 us UN: from 4-40 to 3/8 “x16

  • VTS level:

A common, heavy thread milling grade TiAlN coating for high wear resistance

Spiral grooves with coolant thru for additional deep threaded applications

Features and benefits

  • maximum thread length: 3xDo (thread diameter)
  • reduce the bulge of the cutting force

, Multi – tooth geometry

  • reduction of long thread processing time
  • VTH rating:

A common, heavy thread milling grade grinding, coating on wea with high abrasion resistance

Composed of GROOVEX VHG – the new series of the cut tool, provides a wider range of application and the option, in the same insert pocket, deep groove were shut down, rotate, analysis, boring, surface grooves and threads. VHG cutting inserts also provide a variety of chip forming and carbide grades, making the VHG-cut program a very generic system.

The VHG-cut tool covers a wide range of thread processing standards in the processing between the shoulders and near the main shaft, reaching a depth of 10.0 mm.

Vg – cut has a unique multi-functional geometry that allows end users to reduce inventory in a wide range of application options.

VHMG – very hard substrate with a fixed edge. PHVD coating M35 low cutting speed. Recommended for stainless steel and discontinuous cutting.

The wide application of vhpg-submicron substrate. Excellent anti – fracture resistance.

PHVD coating P20 for medium to high cutting speed. Suitable for opening and rotating of alloy and stainless steel.

VHKG – hard substrate. CHVD coating K25.

Excellent wear resistance, high cutting speed. It is recommended to cast iron and channel steel in stable condition.

The correct chip formation is critical to the evacuation of the chip.

VX MINIPRO series

As demand for smaller, more precise solutions grows, mechanics are forced to find professional tools and expert solutions to the growing challenges.

The VX MINIPRO series provides customers with the perfect tool for any internal thread operation.

Mini – 3 standard tool – IC 4.0-6.0

IC range: 0.25-2.0mm / 32-14 TPI

Minutes. India. -5.95-10.0 mm

UN thread standard, ISO standards, the United States, Whitworth, BSPT, NPT, NPTF, Trapez, the ACME, the stub ACME, UNJ & Pg

Mini-3 u-ic 5.0

IC range: 1.75-2.0mm / 14-10 TPI

Minutes. India. 9.0 mm

Thread standard: ISO standard, U.S. UN,Whitworth, Trapez, USA ACME & Stub ACME

The Mini – 5.0 L – IC

IC range: 0.350-2.0mm / 40-14 TPI

Minutes. India. -7.3-9.0 mm

UN thread standard, ISO standards, the United States, Whitworth, BSPT, NPT, NPTF, Trapez, ACME in the United States, the stub ACME, UNJ, MJ & Pg

Miniature double-head

IC range: 0.3-1.5mm / 48-16 TPI

Minutes. India. -3.2-13.0 mm

Thread standard: ISO standard, United States, Whitworth,NPT & NPTF

Drilling, thread milling, chamfering

Features and benefits

The TR tool performs drills, lines, and chamfering in a tool operation

Predrilling no longer required!

Tools also apply to pre-drilled parts, such as blind holes, through holes, or even semi-finished holes

The coolant thru is provided for the handle diameter of 8, 10, and 12 mm tools

Thread length: 2xDo and 2.5 do (thread diameter)

Thread standard:

ISO metric: from M3x0.5 to M23x2.0

United Nations: from 4-40 to 3/8 “x16

TR can be used in VTS levels

TM solid 3-in-1 tool reduces cycle time and productivity

Features and benefits

  • the TR tool drill, line and chamfering are all in one tool operation
  • no longer needed for pre-drilling!
  • drilling and thread milling are simultaneous, and the inverted Angle is generated at the end of operation
  • this multi-functional tool also applies to pre-drilled parts, such as blind holes, through holes, or even semi-finished holes

Cutter holder

Working closely with customers, VS engineers provide the best solutions for your operations, and guide and advise on the implementation of custom processing.

This customized solution team has all the tricks to design the right cutting tools, using the latest technology and first-class technology.

A new, unique anti-rotation plug designed to insert and tool support to ensure 100% insertion of static and system rigidity throughout the process.

Benefits:

The rotary plug

  • persistent and accurate thread verticality to ensure compliance with standard specifications
  • uncompromising contour accuracy

Cutter holder support

  • excellent surface finish
  • extend tool life to achieve special cost-effectiveness

Steel anvil

  • best support for cutting edges

Nickel coating

  • better wear resistance and corrosion protection

Scope of tools:

  • available in IC 1/2 “F, standard and multi-plus style”

– some 60 °, 55 °, ISO, the United Nations, W, the nuclear non-proliferation treaty

Wheel (DIN405 DIN20400)

– us support, public support (Sagengewinde)

– Trapez, ACME, stub ACME

  • VHTX and VHRX levels can be used for all standard inserts
  • external and internal right hand tools

Extra large pitch for heavy application design, high to 25mm or 1 TPI.

Benefits:

  • new plug-in design – enhances the insertion of geometric dimensions of heavy thread applications
  • standard solution – insert and tool holders are no longer sold as special items to ensure quick ordering and delivery
  • unique tool holder support – adds stability
  • unique clamping system – indentation insertion edge, which can withstand greater cutting force during processing, preventing insertion rotation

Scope of tools:

Insert size

IC 5/8 “mg-ic 5/8” has a cutting edge designed for large pitch design

From the scope of

10 to 25 mm (tpi) 2-1

Standard range

  • ISO

Wheel (DIN 20400).

  • TRAPEZ

ACME,

  • the stub ACME
  • adjacency
  • measurement support (SAGE)

Rotary tools for small machining solutions

The MINIPRO series offers a series of indexable and solid carbide tools for threading, grooving, and boring applications.

A hole with a diameter of 3.2mm in diameter

Mini tools:

The VX MINIPRO series aims to provide an answer to almost all thread operations that are executed on tiny, high-precision components.

VX thread

VX thread conversion tools provide a wide range of external and internal solutions:

Standard tools are used for medium and fine pitch

V6 style insertion with six cut corners

F – wire insertion – fixed clamping system for high load

U-insert is used for large pitch

The vg cutter is inserted between the shoulders

Super large pitch v type insertion

The high line is inserted into 25 mm or 1 tpi

Batch production of multiple + inserts

Mini-v miniature vertical tool

Small, small drilling tools

Micro – and double – end tools, dimensions small to 3.2 mm grade

VRX multi-purpose threaded turning – new!

The new VHRX class is a multi-purpose grade of high quality suitable for processing steel, hardened steel to 55 HRc, stainless steel, high temperature alloy and non-ferrous metal in low and high cutting speed.

The advanced process of making VHRX ensures stronger wear resistance, longer tool life and better production efficiency.

In addition to the new VHRX level, the VX thread conversion program provides a wide range of levels for threads of any type of material.

VHX’s professional ranks include:

VHRX – multi – purpose quality grade for various materials and cutting conditions

VHTX – is a good choice for general purpose and steel

High performance polishing grade for VHTXP – oil and gas applications

VHKX – excellent medium and high speed working environment

Vhbx-carbide grade for mass production

VHM7 – is a unique performer in stainless steel

Vhk2-non-ferrous, cast iron and titanium alloy material without coating grade

VHK2P – high polishing, high quality surface treatment of aluminum.

The screw thread standard

With 28 different standards, VS provides the most extensive thread standard in the industry.

Custom solution

No matter whether you need a non standard size, the shape of a complex or a special design, VS custom solutions team has experience and proprietary technology, essentially any tool solution.